Klüberbio Z 2-5 is a thin-bodied, fully synthetic, rust-removing agent with excellent penetration properties. This special penetrating oil provides reliable lubrication and corrosion protection without formation of unwanted gum or residues.
KLUBERBIO Z 2-5 SPRAY
- For all corroded parts, e.g. screws, bolts, hinges, sliding fits etc. The fluid distributes and penetrates readily. Thin localised corrosion films are dissolved quickly by contact with the lubricant. Extreme corrosion films may take slightly longer to dissolve.
- Reliable lubrication of chains, bearings, springs, sliding points, wire ropes, locks, hinges, antennas and joints. Application of a thin lubricating film reduces friction and wear considerably.
- Removes residues and bitumen on large girth gear and pinion drives when changing lubricants and provides good corrosion protection.
- Eco-friendly, because readily biodegradable
- Easy to apply, as ready-to-use and easily spray-applied
- Less cleaning required, because fully synthetic product with no tendency to gumming
- Less maintenance required as the product provides a cleaning, lubricating and anticorrosion effect at the same time
| Characteristics | Klüberbio Z 2-5 Spray |
| Article number | 081223 |
| Data of the | active agent |
| Appearance | clear |
| Colour space | yellow |
| Density, DIN 51757, 20°C | approx. 0.88 g/cm³ |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 5 mm²/s |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx | 36 months |
Copyright © 2021 Petrotech Industrial and Mineral Oils - Konya | All rights reserved.
